Ultrasonic metal melt equipment
Ultrasonic degassing is a clean and relatively inexpensive technology that uses high-intensity ultrasonic vibration to generate oscillating pressure in molten aluminum. Degassing requires the introduction of sound energy of sufficient intensity into the melt to establish pressure changes, thereby triggering cavitation, and finally completing the degassing process of the metal.
Ultrasonic dip soldering equipment
Ultrasonic dip soldering is more environmentally friendly than traditional soldering methods. Vibration and cavitation in the ultrasonic dip soldering process cause the oxide layer on the surface of the weldment to fall off. High-frequency vibration energy does not melt the solder, and it helps the solder to wet the weldment. .
The ideal choice for large-area coating during dipping welding. The solder is melted in a special welding crucible equipped with an ultrasonic vibrator. When the molten solder generates ripples on the ultrasonically vibrated surface, the coated part is immersed. The surface cleanliness of the welded parts has a significant impact on the welding performance. It is recommended to clean the welding surface with acetone before welding to achieve a better welding effect.
Ultrasonic Soldering Iron
Ultrasonic tin welding is a flux free welding method. Compared with the traditional welding method, it is considered to be more environmentally friendly. Remove the surface oxide layer from the welding surface by vibration and cavitation instead of chemical agent.Ultrasonic tin welding technology is different from ultrasonic plastic welding. It melts the connected parts by generating heat through vibration. The use principle of ultrasonic soldering is basically the same as that of ultrasonic cleaning. Vibration energy causes cavitation in water bath or cleaning solvent. The part immersed in liquid medium will clean the surface through the strong erosion of cavitation bubbles.